The BSA A7-A10 Forum

Technical (Descriptive Topic Titles - Stay on Topic) => Frame => Topic started by: coater87 on 19.08. 2017 04:19

Title: Oil tank and toolbox mounting long bolts
Post by: coater87 on 19.08. 2017 04:19

 The bolts that go through the ears on the swing arm frame, through the tool box/ oil tank, the ones with the rubber spacers.

 Do those bolts pierce the rear mudguard on the 1958 bikes?

 My fenders don't have holes for this, but I keep running into pictures of those bolts used as fender mounts. *conf*

Lee

Title: Re: Oil tank and toolbox mounting long bolts
Post by: JulianS on 19.08. 2017 09:40

They dont, they only mount the oil tank and tool box.

Below from an earlier catalogue but shows the principal.

Title: Re: Oil tank and toolbox mounting long bolts
Post by: coater87 on 19.08. 2017 09:50

Thank you Julian,

 I just was not sure if maybe my fenders were welded over, or what was going on.

 Lee