The BSA A7-A10 Forum

Technical (Descriptive Topic Titles - Stay on Topic) => Frame => Topic started by: Tone on 03.07. 2009 19:40

Title: Tank fitting
Post by: Tone on 03.07. 2009 19:40

Hi All, Silly question but, where does the rubber cylindrical washer go, between the frame and tank? or under fixing nut and washer?

Title: Re: Tank fitting
Post by: flashblack on 03.07. 2009 20:19

Hi Tone,
          It should go into the top of the tank and sit snugly in a recess underneath the washer and bolthead *smile*
                               cheers,
 
                                          Richie



   p.s. you also should have some rubber pads between the frame and tank.