The BSA A7-A10 Forum

Technical (Descriptive Topic Titles - Stay on Topic) => Frame => Topic started by: Peter in Aus on 23.03. 2018 04:00

Title: Center stand spring swinging arm
Post by: Peter in Aus on 23.03. 2018 04:00

Can any one recommend some place that I can get a return spring Part No. 42-4730 for my center stand (58 GF SA) that dose not stretch after a week or two of use. Please.
I have got one from Draganfly and one from some other place that I can't remember both stretched leaving the stand swing in the breeze, not good *problem*
Peter
 

Title: Re: Center stand spring swinging arm
Post by: berger on 23.03. 2018 13:08

i am not at the pub that's a good start. in the 70s my stand was bouncing  about and me and a mate fitted a 500 Honda 4 spring , job sorted

Title: Re: Center stand spring swinging arm
Post by: Peter in Aus on 24.03. 2018 04:10

Thanks berger, Sorry to hear you are not down the pub *beer*
Will go down to the Honda shop and see what I can find,
Peter

Title: Re: Center stand spring swinging arm
Post by: berger on 24.03. 2018 16:07

good plan, mines still going well after all these years, so good old japanese crap I say