The BSA A7-A10 Forum

Technical (Descriptive Topic Titles - Stay on Topic) => Frame => Topic started by: Rex on 26.05. 2018 09:41

Title: Couple of quickies... knee pad screws, fork seal, hub bearing cover.
Post by: Rex on 26.05. 2018 09:41

Anyone know the screw thread holding the knee pad backing plates on a 1951 A7? 0BA I would guess at, plus what is the size of the oil seal in the front fork holders, and lastly are the 7" front hub external bearing covers available in stainless?
Thanks.

Title: Re: Couple of quickies... knee pad screws, fork seal, hub bearing cover.
Post by: muskrat on 26.05. 2018 12:19

G'day Rex.
Part # 02-0079 1/4" x 26 tpi x 1/2" long according to this list http://stainlessbits.com/link12.html
Cheers

Title: Re: Couple of quickies... knee pad screws, fork seal, hub bearing cover.
Post by: Greybeard on 26.05. 2018 13:06

I recently removed the Golden Flash badges from my tank to clean underneath. I don't think the screws were 1/2" long; more like half that length.

Title: Re: Couple of quickies... knee pad screws, fork seal, hub bearing cover.
Post by: muskrat on 26.05. 2018 13:16

 knee pad backing plates  *red*

Title: Re: Couple of quickies... knee pad screws, fork seal, hub bearing cover.
Post by: Greybeard on 26.05. 2018 13:21

Quote from: muskrat on 26.05. 2018 13:16

knee pad backing plates  *red*

Oh yes! Sorry for that.  *red*

Title: Re: Couple of quickies... knee pad screws, fork seal, hub bearing cover.
Post by: Rex on 26.05. 2018 16:56

Quote from: muskrat on 26.05. 2018 12:19

G'day Rex.
Part # 02-0079 1/4" x 26 tpi x 1/2" long according to this list http://stainlessbits.com/link12.html
Cheers

1/4 Cycle then Musky. Thanks.