The BSA A7-A10 Forum
Technical (Descriptive Topic Titles - Stay on Topic) => Frame => Topic started by: Slymo on 15.10. 2018 00:09
-
Well Into the second half of this 58 SR rebuild and I'm looking for recommendations for a supplier of proper rubber for both foot pegs and tank mountings. I bought some in the past for a B44 that simply dissolved into dust in weeks and were clearly latex rather than properly vulcanized rubber.
-
Well Into the second half of this 58 SR rebuild and I'm looking for recommendations for a supplier of proper rubber for both foot pegs and tank mountings. I bought some in the past for a B44 that simply dissolved into dust in weeks and were clearly latex rather than properly vulcanized rubber.
C&D autos for foot pegs, the locally supplied ones I bought split during fitting *problem*, the C&D ones didn’t, which is good start at least *woo*
Top tube tank mountings I made by laminating old inner tube with glue, formed around a piece of pipe.
-
Try Jeff Hunter Engineering https://www.totalbikebits.com/product_locator/dealerdetails.php?id=195
I bought some tank rubbers from him for my Sunbeam S7D which were top quality and fitted perfectly although not cheap.The ones I bought from India on ebay may be ok for starting a bonfire but were absolute rubbish.
Jim
-
Thanks folks I'll give them a go. The inner tube trick is also worth a thought. Cheers S:)
-
We have a large range of rubbers to suit. Have had no issues with customers reporting splits etc. always recommend putting rubbers in/on with a bit of "Rubber grease"
https://mikesclassiccyclespares.com/home/shop/?product_cat=&post_type=product&s=rubber
All prices in Au$ and we ship worldwide.
If you cant find what you are looking for just shoot us a message as we probably just haven't listed it yet. *smile*