The BSA A7-A10 Forum

Bikes, Pictures, Stories & more => Introductions, Stories, Meetings & Pictures => Topic started by: a10rgs on 26.03. 2019 08:07

Title: New member
Post by: a10rgs on 26.03. 2019 08:07

Moin, my Name is Uwe and I live in northern of Germany about 20 km south of Bremen! I retired last year and hope to find some time to ride my A10 RGS!
At the time I'm building a NorBSA, a wideline frame with a twin carb A10 engine! I have a small workshop with lathe and milling machine and try to do most things by myself! Cheers   

Title: Re: New member
Post by: WozzA on 26.03. 2019 08:12

Welcome to the Forum Uwe,    *welcome*

Title: Re: New member
Post by: a10 gf on 26.03. 2019 08:28

Welcome aboard !

Title: Re: New member
Post by: Greybeard on 26.03. 2019 08:59

 *good3*

Title: Re: New member
Post by: tinu on 26.03. 2019 10:24

Moin Uwe
Nice to have you here!
Because nobody mentioned it yet... we like pictures!  *smile*
Cheers Tinu

Title: Re: New member
Post by: a10rgs on 26.03. 2019 10:39

Moin Tinu,

I will try! The black and white foto shows the bike as it was delivered to Austria!

Cheers   

Title: Re: New member
Post by: a10rgs on 26.03. 2019 10:41

 *sad2*

Title: Re: New member
Post by: berger on 26.03. 2019 11:12

welcome Uwu *welcome* nice beezer, I am starting to build a norbsa with slimline  frame and A7 ss engine .it will be slow progress but I have got the Suzuki fork yokes in and starting to  build a rrt2 with lower road friendly  first gear . undecided on a back wheel at the moment , it has a box section swinging arm , but will put the Norton one in just to get it wheeled about , the stub axle is not long enough on the threads with this swinging arm to be safe, but a rolling frame just to see where everything will fit is better than no rolling frame. good luck with your build *smile*

Title: Re: New member
Post by: a10rgs on 26.03. 2019 11:46

Moin Keith,

my NorBSA is also a long time project! I will take the Norton roadholder front fork with a Norton duplex wheel! For the rear I have modified a Triumph conical
brake which should go in the Norton swing arm!

Cheers   

Title: Re: New member
Post by: duTch on 26.03. 2019 13:36

 hiya Uwe....

Quote

.....and hope to find some time to ride my A10 RGS!.....

.... you just need to go to the shop for some milk- but a very 'special far from home' shop, the milk is better there *smile*

 Who's Keith ?


 

Quote

.......and starting to  build a rrt2 with lower road friendly  first gear . .........

hmmmm- maybe easier than upping 2nd gear in a STD box... how do?

Title: Re: New member
Post by: berger on 26.03. 2019 18:22

have you been on the barley pop dutch or the mary jane pipe *whistle*. uwe I am at same stage, which gearbox are you using .

Title: Re: New member
Post by: bsa-bill on 26.03. 2019 20:17

Welcome a10rgs,

Title: Re: New member
Post by: a10rgs on 27.03. 2019 08:15

Moin,

I think berger is Keith *????*! I'm using a STD BSA gear box! 

Cheers

Title: Re: New member
Post by: tlmark on 27.03. 2019 20:54

 *welcome*

Great forum and very helpful