The BSA A7-A10 Forum

Bikes, Pictures, Stories & more => Wanted & For Sale => Topic started by: 1985_Oyestein_RGS on 26.06. 2019 21:14

Title: Wanted BSA A10 Alloy Head
Post by: 1985_Oyestein_RGS on 26.06. 2019 21:14

Looking for a BSA A10 Alloy head. Has anyone got 1 for sale??

Title: Re: Wanted BSA A10 Alloy Head
Post by: Butch (cb) on 27.06. 2019 09:04

Roger at Cake Street used to have a couple of shelves worth of them. Not sure now.

Title: Re: Wanted BSA A10 Alloy Head
Post by: Greybeard on 27.06. 2019 09:16

Welcome to this fabulous forum. We are a friendly group. Please, will you go to Introductions and tell us a little about your interest in 'A' series BSA's. Pictures are good.

Title: Re: Wanted BSA A10 Alloy Head
Post by: RoyC on 27.06. 2019 11:15

Quote from: 1985_Oyestein_RGS on 26.06. 2019 21:14

Looking for a BSA A10 Alloy head. Has anyone got 1 for sale??

It's in POOR CONDITION but. Will this one do ?   https://www.ebay.co.uk/itm/BSA-A10-ROCKET-ALLOY-CYLINDER-HEAD-SEE-ALL-DISCRIPTION/153452160006?hash=item23ba762406:g:ir0AAOSwo-5cpcDi

Title: Re: Wanted BSA A10 Alloy Head
Post by: 1985_Oyestein_RGS on 27.06. 2019 20:31

Thins head on eBay has a lot of damage, especially close to the valve seat.not worth the risk, will keep looking, hopefully something may turn up.

Title: Re: Wanted BSA A10 Alloy Head
Post by: chaterlea25 on 27.06. 2019 20:59

Hi and welcome,
There was a very nice one sold on eBay in USA the other day
I have bought two from there over the years. The USA heads can be really low mileage so good condition

John

Title: Re: Wanted BSA A10 Alloy Head
Post by: Rocket Racer on 12.07. 2019 01:20

presumably you're after the later single port head, not the 54/55 twin port head?
You can also fit an a7ss head if you can find one

Title: Re: Wanted BSA A10 Alloy Head
Post by: 1985_Oyestein_RGS on 12.07. 2019 21:29

I have an A7 SS head, I did contemplate fitting it but I'm not going racing with the bike so, thought I should settle for 8.25:1 pistons and a 357 cam and keep looking for an A10 single port head. Im sure to find 1 eventually  *smile*

Title: Re: Wanted BSA A10 Alloy Head
Post by: bsa-bill on 12.07. 2019 21:58

When I get around to fettling my RGF back to GF I'll have one for sale, but got shed to finish, radiotherapy to undergo and life to lead in the meantime, so if you can't get one in the next three-four months just keep me in mind

Title: Re: Wanted BSA A10 Alloy Head
Post by: 1985_Oyestein_RGS on 12.07. 2019 22:36

Thanks Bill. I will be patient so please do bear me in mind

Title: Re: Wanted BSA A10 Alloy Head
Post by: laneplodder on 18.09. 2019 20:28

Hi there, how is your A10 alloy head search going? We have one here which has all fins intact, ideally needing a head skim (£20 roughly) to bring it up to near new condition..

I can send a few pics over if you wanty to have a look at it?

Thanks, Matt

Title: Re: Wanted BSA A10 Alloy Head
Post by: 1985_Oyestein_RGS on 22.09. 2019 18:59

Hi,

Managed to find a cylinder head for my bike. Appreciate all the help.