The BSA A7-A10 Forum

Technical (Descriptive Topic Titles - Stay on Topic) => Frame => Topic started by: muskrat on 20.08. 2009 10:53

Title: '56-57 rear sprocket studs
Post by: muskrat on 20.08. 2009 10:53

G'day all,
            I need to replace the studs in my Ariel type hub. I see their held in by scotch keys (pins down the side of the stud). Are they a straight pin or threaded ? There is a small hole inside the hub at where I think the pin is, but have broken 2 pin punches trying to punch them out. Any suggestions.
Cheers

Title: Re: '56-57 rear sprocket studs
Post by: muskrat on 04.09. 2009 10:21

G'day all,
            I got'em out. The pins are 1/8" diam X 3/8" long. I drilled 3/32" down the pin and collapsed them, then unscrewed the studs. Hope this helps anyone else with these hubs.
Cheers