The BSA A7-A10 Forum

Technical (Descriptive Topic Titles - Stay on Topic) => Frame => Topic started by: Miker on 13.07. 2020 03:14

Title: Centre Stand Spring
Post by: Miker on 13.07. 2020 03:14

Just thought I would let everybody know how I fitted the centre stand spring.  (Sorry if this has been mentioned before ).A Couple of tek screws in a scissor jack stretch to the right length and chuck some washers where you can. Easy Peasy.

Title: Re: Centre Stand Spring
Post by: bsa-bill on 13.07. 2020 10:53

bit of lateral thinking going on there

Title: Re: Centre Stand Spring
Post by: muskrat on 13.07. 2020 20:32

Great idea Miker. I'll use that one.
Cheers