The BSA A7-A10 Forum

Technical (Descriptive Topic Titles - Stay on Topic) => Frame => Topic started by: Truckedup on 28.09. 2020 14:04

Title: Lower fork leg ID
Post by: Truckedup on 28.09. 2020 14:04

 I have some spare parts to sell, but unsure of these  fork sliders, A10 ?

         

Title: Re: Lower fork leg ID
Post by: scotty on 28.09. 2020 17:38

Does that spindle thread in to a captive thread in the fork leg?
If so it MAY be off A10 with single sided front brake hub ??
S

Title: Re: Lower fork leg ID
Post by: morris on 28.09. 2020 19:34

For as far as I can judge, they look exactly like my plunger’s half width hub sliders.

Title: Re: Lower fork leg ID
Post by: Truckedup on 28.09. 2020 20:38

Quote from: scotty on 28.09. 2020 17:38

Does that spindle thread in to a captive thread in the fork leg?
If so it MAY be off A10 with single sided front brake hub ??
S

yes ,a left hand thread..

Title: Re: Lower fork leg ID
Post by: scotty on 28.09. 2020 21:40

Yes LH thread would be consistent with spindle as fitted to A and B swing arm bikes with half width brake hubs.
I have them on my swing arm ‘54 B33