The BSA A7-A10 Forum
Technical (Descriptive Topic Titles - Stay on Topic) => Frame => Topic started by: tribsa on 15.01. 2021 08:52
-
has anyone ever seen special characters used in the frame number sequence, my documentation has a / within the number so reads ZA7S30/58 could this have been mis read or did they use /
-
The answer is that it is unlikely because of possible confusion with a 1.
Some 1972 season machine engines are seen with a / after the model prefix - B50T/ for example.
I suspect the intended number would be ZA7S 30158 which is in the 1952 season ZA7S frame sequence.
-
Can't be those numbers as frame numbers, like engine numbers started at 101.
A number under that was either a works bike or a special order which were usually numbered 001 to whatever the last one was .
Never seen a number with less than 3 digits.
-
I have seen a car document where the VIN number SAA37xxx said SAA3/xxx on the document. Apparently someone had taken the 7 for a / when registering or re-registering
-
has anyone ever seen special characters used in the frame number sequence, my documentation has a / within the number so reads ZA7S30/58 could this have been mis read or did they use /
Does the number on the frame match the document?