The BSA A7-A10 Forum
Technical (Descriptive Topic Titles - Stay on Topic) => Frame => Topic started by: azcaveman on 15.09. 2021 02:18
-
This is for anyone who may want a stencil to spray paint the BSA logo on a license plate holder. I made an outline drawing from a decal and taped it onto some contact paper and then cut it out with an exacto knife. Then I carefully stuck the contact paper to the black paint before hitting it with yellow spray paint.
It was tricky to place the centers of the "B" and "A" but I was pretty happy with the results. The original paint job had a red outline so I doubled up the inside lines for anyone wanting to add the red paint.