The BSA A7-A10 Forum

Bikes, Pictures, Stories & more => Introductions, Stories, Meetings & Pictures => Topic started by: HappyBiker on 03.04. 2022 16:47

Title: Plunger A10 rebuild (advice needed)
Post by: HappyBiker on 03.04. 2022 16:47

I'm new to the Forum (a friend recommended it to me). I have most of a 1952 plunger-A10 so hope to start the rebuild in the summer. I have no documents so the bike has to be built first to show that it is a bike then it has to be registered. I'm hoping anyone who has rebuilt a plunger A7/A10 will pass on words of wisdom. note: I have rebuilt one of my shooting stars but I had all the bits and photos to work from. This time it's diagrams from Draganfly the BSA spares catalogue and the Roy Bacon book. cheers from Happy Biker

Title: Re: Plunger A10 rebuild (advice needed)
Post by: Greybeard on 03.04. 2022 18:29

Here is my 1955 A10. If you need photo's or other data, give me a shout, (on the forum).

Title: Re: Plunger A10 rebuild (advice needed)
Post by: muskrat on 03.04. 2022 20:11

G'day HappyBiker  *welcome*
You'll get all the help you need here. Just post questions as you go in the appropriate sections.
Drags is great for exploded diagrams and our literature section for service sheets.
Cheers