The BSA A7-A10 Forum

Technical (Descriptive Topic Titles - Stay on Topic) => Lucas, Ignition, Charging, Electrical => Topic started by: PatM20 on 15.03. 2023 16:56

Title: Lucas K2F Mag Pick Ups
Post by: PatM20 on 15.03. 2023 16:56

Hi, I need to order two (left hand and right hand) mag pick ups. Does anyone know if they are 90 or 45 degrees? I need clip on pick ups not the ones with two screw holes. Regards Pat

Title: Re: Lucas K2F Mag Pick Ups
Post by: trevinoz on 15.03. 2023 20:42

Should be 45 to clear the drip tray.

Title: Re: Lucas K2F Mag Pick Ups
Post by: Colsbeeza on 15.03. 2023 21:56

What Trev said. Make sure you get good carbon pickup brushes.
Col

Title: Re: Lucas K2F Mag Pick Ups
Post by: groily on 16.03. 2023 06:08

But note that if the mag is manual advance  the 45° one on the front (cylinder side) will also need to be cranked for clearance of the casting. Regular 45° ones aren't.
If there's an ATD on the bike, no problem.

Title: Re: Lucas K2F Mag Pick Ups
Post by: PatM20 on 16.03. 2023 08:18

It's an ATD mag. Thanks for all the responses.

Title: Re: Lucas K2F Mag Pick Ups
Post by: Greybeard on 16.03. 2023 09:20

If you contact forum legend Andrew at Priory Magnetos he may be able to provide what you need.
https://sites.google.com/site/priorymagnetos/home

Title: Re: Lucas K2F Mag Pick Ups
Post by: CheeserBeezer on 16.03. 2023 11:17

Quote from: Greybeard on 16.03. 2023 09:20

If you contact forum legend Andrew at Priory Magnetos he may be able to provide what you need.
https://sites.google.com/site/priorymagnetos/home

Yes, always happy to help, and I can guarantee that the pickups and brushes I sell won't kill your bike within 50 miles.............. unlike some others available!