The BSA A7-A10 Forum

Technical (Descriptive Topic Titles - Stay on Topic) => Lucas, Ignition, Charging, Electrical => Topic started by: Steve Percival on 13.04. 2023 09:30

Title: Magneto drive gear remouval
Post by: Steve Percival on 13.04. 2023 09:30

Can anyone help on how to remouve this drive gear - photo below. It has an internal thread - is there a special puller for this? I do not like the idea to drift the magneto shaft out though the gear incase I damage the crankcase housing? or is that the only way?

Any help would be appriciated, thanks, Steve

Title: Re: Magneto drive gear remouval
Post by: RDfella on 13.04. 2023 09:40

Internal thread = puller (bolt with appropriate thread) required.

Title: Re: Magneto drive gear remouval
Post by: muskrat on 13.04. 2023 09:48

G'day Steve  *welcome*
The tool is part number 61-1903 https://tinyurl.com/342fmtff
Now get over to Intro's and give us your story.
Cheers

Title: Re: Magneto drive gear remouval
Post by: Steve Percival on 13.04. 2023 09:52

Hi Muskrat, thats looks like what I need, thanks and will take a look now and find where I post my story. *smiley4* *smiley4* *smiley4*

Title: Re: Magneto drive gear remouval
Post by: Billybream on 13.04. 2023 14:18

Try Andrew at Priory Magneto,s, he,s a forum member and will certainly have them in stock

Title: Re: Magneto drive gear remouval
Post by: Sav on 13.04. 2023 18:37

Strange? Blooming sure I answered this one this morning, but the post has gone