The BSA A7-A10 Forum
Technical (Descriptive Topic Titles - Stay on Topic) => A7 & A10 Engine => Topic started by: Von datoh on 14.05. 2024 21:08
-
Hi everyone,does anyone know or can recommend an engine specialist who offers all the usual services ie crankshaft regrind/balance etc help with rebuild of my a10 project.Tried emailing srm over in Wales for a price list no reply(I must call them!)tried messaging Steve McFarlane is it think I got that right no reply either !!.Any suggestions or experiences greatly appreciated.
-
T&L engineering Bedford is not south west but they know the stuff with these old engines
-
I've just had a crank / big end grind and TS bush hone at Classic and Modern Engines in Bracknell. Also had oversize guides pressed in and honed and valve seats cleaned up. About £250 for the bottom end and £180 for the head.
-
That sounds fair price limeyrob,thanks for sharing
-
There is Hamlins Engineering in Bridgewater. I have not used them myself yet but have heard that they do a good job. Hopefully somebody else on here has used them and can say.
https://hamlinsengineering.co.uk/services/veteran-vintage-and-classic/
-
I’ll look into that firm in bridgewater that’s nearby thanks
-
Seager Engineering
e mail [email protected]
phone 44 7880 602012
they post lots of vid on fb seem to do quality work but they are very busy , so dont know what the timeline would be
-
I have used Hamlins in Bridgwater and they did an excellent job. They really do know their stuff. Thoroughly recommend
-
Thanks people for the responses I shall look into the suggestions