The BSA A7-A10 Forum

Technical (Descriptive Topic Titles - Stay on Topic) => Frame => Topic started by: kanchanau on 08.10. 2025 03:11

Title: Whats the correct tank knee pad
Post by: kanchanau on 08.10. 2025 03:11

Whats the correct tank knee pad for bsa a10 plunger 1952 650cc. Most of the guys using the round type one but few triangle type also there .

Title: Re: Whats the correct tank knee pad
Post by: muskrat on 08.10. 2025 20:20

G'day kanchanau.
My 51 A7 had this type but with two holes to get to screws that hold them onto the stiffening plate and tank.
Cheers

Title: Re: Whats the correct tank knee pad
Post by: kanchanau on 10.10. 2025 07:05

I Need to know which model goes to A10 ?

Title: Re: Whats the correct tank knee pad
Post by: Bsareg on 10.10. 2025 09:48

As shown above, the triangular type were fitted to both A7/A10 and most other models during the 1952 range.