The BSA A7-A10 Forum

Technical (Descriptive Topic Titles - Stay on Topic) => Lucas, Ignition, Charging, Electrical => Topic started by: dpaddock on 14.06. 2010 14:32

Title: K2F Armature Schematic
Post by: dpaddock on 14.06. 2010 14:32

Does anyone have a wiring schematic of the Lucas K2F magneto armature?

David

Title: Re: K2F Armature Schematic
Post by: Triton Thrasher on 14.06. 2010 21:41

One end of the LT goes to the armature yoke. The other end goes to the screw that holds the points plate on, with the condenser bridging that connection to the yoke. The yoke is earthed to the engine by the earth brush.

One end of the HT goes to the slip ring. The other to the yoke.

Have I got that right?

Title: Re: K2F Armature Schematic
Post by: groily on 15.06. 2010 07:15

David, you could look at www.brufnut/de/WORKSHOP/LUCAS/lucas.htm which might help as the pix there show pretty much everything. Some guy! Otherwise, the Lucas service sheets are semi-helpful, especially the one on remagnetising.