The BSA A7-A10 Forum
Bikes, Pictures, Stories & more => Wanted & For Sale => Topic started by: bikemadinspain on 19.12. 2012 15:22
-
Hi, I am after a full set of HT leads cable and caps etc to fit my 53 plunger Magneto, Does anybody know where I can ge a set from or parts to rebuild the originals?
I have tried a few dealers back in England with little or no response.
Or does anybody know about an update that is fitted. I am planning on coverting the bike to 12 volt if this makes any difference.
Any help as always greatly appreciated.
Many thanks
-
I get all my stuff from here. http://www.magneto.co.uk/
All the best Goldy
-
Hi,
Take a look here;
http://www.degroot-bsa.nl/product_info.php/cPath/36_128/products_id/1453
and here;
http://www.degroot-bsa.nl/index.php/cPath/36_74/sort/2a/page/2
Good luck
-
Gents, many thanks for the info I have visited both coy's and I have a funny feeling I will be buying a bit more than I was after !!
PS Morris I like your garage sign you should make them in metal and sell them!!!!
-
Hi Bikemad,
Always end up the same way to.
Go for buying one thing, and end up with a whole list.
Picked up the sign in a HD accesoirs shop, so it's bound to be American of origin.
It's above my workbench, as a reminder, when I'm in despair.....
-
Just a word to the wise, if you are buying pick up holders and brushes be sure to check the brushes are not too soft! If you can write with them they are too soft. So many problems are caused by this one simple thing. Too hard makes them brittle, but as yet I know of no simple way to check that. Anybody any ideas?
-
Many thanks for the advice I will look out for any other info incoming.
Morris, cheers 4 the info I got one off Flee bay £5.00, will look good in the garage, dont worry I wont ruin your style I live miles away from u !!