The BSA A7-A10 Forum
Technical (Descriptive Topic Titles - Stay on Topic) => Frame => Topic started by: Sunbeam on 02.03. 2016 17:31
-
Hi, can anyone tell me why the RGS dual seat has 2 ..5/16 studs and threaded holes to the rear of them. Got the correct thick mudguard to seat plate but unsure which fixings to use before drilling my mudguard.
Thanks
Howard
-
The RGS doesn't use studs but has two extended head set screws.
The studs and nuts were fitted to the other models, also used different holes.
-
Hi Trev....thanks for the info. I was' nt sure which fixings to use as my bike came with the thinner goldie seat bracket fitted to the studs. Bought a new rear guard and correct thicker seat bracket and wanted to get things right before dtilling and chroming.
Many thanks for your help.
Howard