The BSA A7-A10 Forum
Technical (Descriptive Topic Titles - Stay on Topic) => Frame => Topic started by: nimrod650 on 18.06. 2016 17:59
-
hi are there two spindle thread sizes for 8ins s/sided fork legs 9/16ths inch and 11/16ths l/h thread *????*
-
Hi,
The spindle and fork leg are 9/16 x 20 tpi LH
This is the same thread used on old fashioned cycle pedals, an older cycle shop will have a tap if the fork leg threads need cleaning up
Some C11 and maybe early B series used a 1/2 in. spindle but I think this had a nut on the end??
HTH
John