The BSA A7-A10 Forum

Technical => Frame => Topic started by: BSAA10 on 05.07. 2016 08:11

Title: Front brake torque arm
Post by: BSAA10 on 05.07. 2016 08:11
hello. Changing front mudguard on A10 and moved bike during and the torque arm?(the bar that goes from the drum and secured to the fork) has moved and I cant align it again. How can I do this please? Thanks
Title: Re: Front brake torque arm
Post by: Greybeard on 05.07. 2016 09:07
If you loosen the axle you can rotate the back plate. You may need to loosen the torque arm so it can be moved over its stud. This is my experience on an early machine; may not apply to later brakes.
Title: Re: Front brake torque arm
Post by: BSAA10 on 05.07. 2016 11:56
Thank you.