The BSA A7-A10 Forum

Technical (Descriptive Topic Titles - Stay on Topic) => A7 & A10 Engine => Topic started by: TT John on 10.10. 2016 08:30

Title: Offset on wheel
Post by: TT John on 10.10. 2016 08:30

Hello All

I have a 1956 plunger W B33 and am trying to find out what the offset is on the rear wheel, its a splined QD wheel, or where I can find out.

Many thanks in advance TTJohn

Title: Re: Offset on wheel
Post by: morris on 19.11. 2016 20:31

Not sure if your B33 frame/wheels are like an A10 but if so, then the centre of rim 13 mm left of centre of hub should get your wheel centred to the frame

Edit; just noticed my typing error. Should be centre of rim 13 mm right of centre of hub

Title: Re: Offset on wheel
Post by: TT John on 21.11. 2016 10:23

Morrris
I don't think its the same, as its a WM frame which is the same as the sprung M20 with tele's but thanks for your input.

TTJohn