The BSA A7-A10 Forum

Technical (Descriptive Topic Titles - Stay on Topic) => Frame => Topic started by: a101960 on 02.12. 2016 15:31

Title: RGS speedo brackets
Post by: a101960 on 02.12. 2016 15:31

Does anyone know where I could by a pair of the correct speedo brackets (Stainless steel preferably) from? I have found plenty of speedo brackets for sale on the net, but unfortunately none of them are correct for an RGS. The RGS type are angled and are of two part construction.
John.

Title: Re: RGS speedo brackets
Post by: chaterlea25 on 02.12. 2016 16:51

Hi John,
Have you asked Simon at Barleycorn engineering?
He has the fork top plates and the bolts/rubbers
No pic of the finger bracket so Inot sure if its angled?

http://www.barleycorn.co.uk/BSA-Goldstar?product_id=185
http://www.barleycorn.co.uk/BSA-Goldstar?product_id=90
http://www.barleycorn.co.uk/BSA-Goldstar?product_id=90

John

Title: Re: RGS speedo brackets
Post by: a101960 on 03.12. 2016 15:26

John, thank you for your response, but the part number on the Barleycorn website is for Goldies and Super Rockets (65-9111). The RGS item is p/n 65-9167. I will give him a call anyway. I might get lucky.
John

Title: Re: RGS speedo brackets
Post by: bl**dydrivers on 14.12. 2016 12:44

Found these brackets with the distinctive RGS angle.

https://www.ebay.com/itm/291963128825

Title: Re: RGS speedo brackets
Post by: a101960 on 14.12. 2016 13:14

Thanks for that. Just what I was looking for. Ordered and on their way.

Title: Re: RGS speedo brackets
Post by: trevinoz on 15.12. 2016 06:02

Just a bit of trivia, John, the original brackets were standard brackets with the wider extension welded on and a bit of a kick.