The BSA A7-A10 Forum
Technical (Descriptive Topic Titles - Stay on Topic) => Lucas, Ignition, Charging, Electrical => Topic started by: RoyC on 02.04. 2017 09:44
-
I have to run a length of new cable to the rear stop/tail lamp because it is damaged.
Can any one tell me what Amp cable I should order please ?
(I am converting to 12v.)
Thank you.
-
I use 1mm thinwall cable from Vehicle Wiring Products which is rated at 16.5 amps.
-
Thanks Julian.
I know the one you are talking about.