The BSA A7-A10 Forum

Technical => Frame => Topic started by: Goldy on 01.06. 2009 21:04

Title: rear wheel off set
Post by: Goldy on 01.06. 2009 21:04
Does anyone know if a 1956 swinging arm A10 has any rear wheel off set. My wheel builder does not know
Title: Re: rear wheel off set
Post by: dpaddock on 02.06. 2009 15:10
19/32" rim edge to off-side crinkle face.
Ref:  John Gardner, BSAOC UK Newsletter 5/86.

David
Title: Re: rear wheel off set
Post by: dpaddock on 03.06. 2009 14:50
Assuming you are using a WM-2 rim.

David
Title: Re: rear wheel off set
Post by: bl**dydrivers on 23.05. 2011 20:36
While we are on this subject, sorry to hijack your topic Goldy

What is the offset for a 1962 A10 with Full Width Iron hubs?
Im going to use the standard WM2