The BSA A7-A10 Forum
Technical (Descriptive Topic Titles - Stay on Topic) => Gearbox, Clutch, Primary => Topic started by: Topdad on 09.06. 2017 11:31
-
I was fighting with my gearbox last night to try to get the mainshaft to still turn after the outer cover was nipped up and had decided to fit 2 gaskets to the inner cover which I duly did with immediate better results after getting the outer cover on i got egually good results the g/lever returning to middle position and being able to change gears with a nice click ,so far so good . *smile*
next I decided to turn the box over by means of the kickstarter hand on same and push no resistence at all ,bugger cover slightly back reposition kickstart quadrant ,thinking thats got it ,push no resistence ?? *rant* nuts off cover right off whats wrong with this quadrant , only to realise I hadn't put on the ratchet mech on the mainshaft , what a plonker *doh* *doh* *sad* oh dear dementia rules !!
-
Well Bob, as Ive said a few times before- I'm no Gearbox guru, just sometimes get lucky...but my general analysis of this one is as my old boss always said " it's not a farqueup if you find and fix it before someone else does"
and I think you've nailed it *wink2*
-
Well Bob, as Ive said a few times before- I'm no Gearbox guru, just sometimes get lucky...but my general analysis of this one is as my old boss always said " it's not a farqueup if you find and fix it before someone else does"
and I think you've nailed it *wink2*
also *bash*..... *smile*