The BSA A7-A10 Forum
Technical (Descriptive Topic Titles - Stay on Topic) => A7 & A10 Engine => Topic started by: Topdad on 12.09. 2017 11:16
-
Anybody had trouble fitting this ,I'm going bonkers trying to sort this . Its the same spacer I took off which had been fitted correctly but now I find I can't line up all the holes . Can get the 3 larger primary screws lined but the the 2 engine ones are out and vice versa . Is the spacer sided ?? Any other ideas to help preserve my sanity !! *problem* *problem* *angry*
-
Flip it over. Put the side that is against the crankcases against the inner primary.
-
removed my comment guys, didn't read the subject line correctly - ah the joys of septuagenarian-ism
-
Thanks metalflake ,so it is sided ,never had a problem with it before so must have been more alert then !! *sad*
-
Thanks metalflake ,so it is sided ,never had a problem with it before so must have been more alert then !! *sad*
Please can I have a lert?
-
Thanks metalflake ,so it is sided ,never had a problem with it before so must have been more alert then !! *sad*
Please can I have a lert?
I've got a round tuit if that's any help *????*
Cheers
-
*** taking shower .... but i like you really !!!!