The BSA A7-A10 Forum

Technical => A7 & A10 Engine => Topic started by: bl**dydrivers on 03.01. 2018 22:46

Title: A10 Rocker Feed Pipe
Post by: bl**dydrivers on 03.01. 2018 22:46
The type I need is the later type and all I can find using the part number 42-0139 is the lower section.

Can I use the older version 42-0048, cut it and use the required lower section?

Or is the top section different?
Title: Re: A10 Rocker Feed Pipe
Post by: muskrat on 04.01. 2018 00:03
The only difference is the later is cut and a rubber hose fitted. The top banjos are the same.
https://www.draganfly.co.uk/index.php/bsa/bsa/a710--b3133--c101112--m202133/category/867-pre-unit-a-group
Cheers
Title: Re: A10 Rocker Feed Pipe
Post by: bl**dydrivers on 04.01. 2018 00:46
Is the bottom section also the same?

The only difference is the later is cut and a rubber hose fitted. The top banjos are the same.
https://www.draganfly.co.uk/index.php/bsa/bsa/a710--b3133--c101112--m202133/category/867-pre-unit-a-group
Cheers
Title: Re: A10 Rocker Feed Pipe
Post by: muskrat on 04.01. 2018 02:33
Yes
Same oil tank fitting.
Cheers