The BSA A7-A10 Forum
Technical (Descriptive Topic Titles - Stay on Topic) => A7 & A10 Engine => Topic started by: KeithA on 22.06. 2018 07:16
-
Hello all; I am hoping the forum can help with identifying some cylinders and barrels I have here.
Maybe I have the right combinations to start building up a motor.
Barrels
#67-1074 1954-58 S/A A10 square fin thin flange ?? Is this correct
#67-578 A7 ??? Nothing on the internet.
Cylinders
#67-251 A10 1951-52 ?? Plunger ?? Would this be correct
#67-261 or should it be #67-251 Hard to make out the number in the casting
67-1032 ???
67-1056 or should it be 67-1066 ??? Hard to make out the number in the casting.
Large fin head on small fin barrel doesn't look right, same as the other way around.
Is square fin also referred to as large fin.
Sorry for the dumb questions.
Many thanks Keith *eek* *sad2*
-
Just had a squiz at the lists I have and came up with this;
'49-'53;
A7 & Star Twin, 67-378/
67-50 (up to '51)
A10 67-253
'Plunger & S/A; '54-'57
A7/ST/SS 67-1070
A10 67-1074
A7 SS 67-1070
Road Rocket 67-1210
'58 & 'Late 'A series' ' Same as Above ^^
Keep in mind that 'Casting numbers' are one different from Part numbers