The BSA A7-A10 Forum

Technical (Descriptive Topic Titles - Stay on Topic) => Gearbox, Clutch, Primary => Topic started by: spanersc on 03.10. 2018 14:23

Title: Clutch locking plate for a plunger
Post by: spanersc on 03.10. 2018 14:23

Hi All.  Does anyone happen to know the part number of a clutch locking plate that would be suitable for a plunger clutch set-up? 
There are plenty advertised for the later S/A type of 6 spring clutch but I cannot find one to suit a plunger listed.
Any help appreciated as always.
Best Regards, Pete

Title: Re: Clutch locking plate for a plunger
Post by: bsa-bill on 03.10. 2018 17:06

If you have some spare plates (old ones are fine) two bolts and nuts and a length of steel, then they are easy to make

Title: Re: Clutch locking plate for a plunger
Post by: muskrat on 03.10. 2018 20:54

G'day spanersc.
I just put it in gear and lock the rear brake. A rattle gun (air impact driver) works well.
Been meaning to make one for years. Thanks for reminding me Bill.
Cheers