The BSA A7-A10 Forum

Technical => Frame => Topic started by: Nourish on 30.11. 2019 16:13

Title: Fork Shroud I.D.
Post by: Nourish on 30.11. 2019 16:13
I bought some fork shrouds today at the VMCC A/J for my Rigid A10 project, the vendor didn't know what they fitted - do you?
Title: Re: Fork Shroud I.D.
Post by: muskrat on 30.11. 2019 19:29
G'day Nourish.
At first glance I'd say early A50/65 had the slotted hole for the h/light.
Cheers
Title: Re: Fork Shroud I.D.
Post by: Nourish on 05.12. 2019 18:36
 What is the length of the pre Unit twin shrouds?

P.S.  I can't find any pictures of an A50/A65 that doesn't have the headlight cowl or short headlamp bracket - none with long headlamp brackets/shrouds
Title: Re: Fork Shroud I.D.
Post by: bikerjohndavies on 06.12. 2019 08:09
The A7/A10 shrouds are 15" long with a round hole. These were also used on the B and M series pre units as well. I think the shorter ones were used on the C11/C12 bikes but not sure about the slot rather than a round hole for the headlamp bolt. Might they be Triumph?
Title: Re: Fork Shroud I.D.
Post by: muskrat on 06.12. 2019 08:25
Looks very much like these https://www.ebay.com/itm/372861872524
Cheers
Title: Re: Fork Shroud I.D.
Post by: JulianS on 06.12. 2019 09:32
I think from a C25 Barracuda or B44 from around 1967.

Parts 40 5183 and 40 5184

Shown as 13 1/4 long