The BSA A7-A10 Forum

Technical (Descriptive Topic Titles - Stay on Topic) => Frame => Topic started by: fearie on 10.01. 2020 11:54

Title: Air box dimensions. A10 plunger
Post by: fearie on 10.01. 2020 11:54

Hello!

Since I don't have an air box I would like to make a new one.
Can you please help me with dimensions?

Best regards

Title: Re: Air box dimensions. A10 plunger
Post by: Nourish on 13.01. 2020 20:31

As mention in a previous post I have bought an air box that has been cut - https://www.a7a10.net/forum/index.php?topic=6124.0
But here is a layout of this box. I rubbed along the box through the paper to get an imprint and drew this in and hopefully scanned it to 1:1 but have included inch/mm scales.
Hope this helps to start with - if someone could do this with a complete one would be great for all.

Title: Re: Air box dimensions. A10 plunger
Post by: Simon59 on 13.01. 2020 22:00

Hi! Here is a picture of my airbox/battery holder, which I've now fitted to the bike. But I could take some measurements for you if you want, maybe tell me what measurements you need? I know the original item is hard to fine, but I also know that it can be expensive to make one yourself. Cheers, Simon

Title: Re: Air box dimensions. A10 plunger
Post by: Simon59 on 13.01. 2020 22:15

Hi fearie. Here's another picture of the other side of my airbox. Hope this helps

Title: Re: Air box dimensions. A10 plunger
Post by: Russ on 14.01. 2020 09:24

Hi fearie, attached are photo's of my airbox. I can "attempt" to make a template and take more photo's and measurements if you need.
However, I am heading off on holidays for a couple of weeks so will not be able to do it until I get back. Send me a PM if this may be helpful.
Russ

Title: Re: Air box dimensions. A10 plunger
Post by: Simon59 on 14.01. 2020 10:02

Better pictures than mine!  *yeah*

Title: Re: Air box dimensions. A10 plunger
Post by: Nourish on 14.01. 2020 10:33

Hi Russ, I wouldn't mind a template to enable to restore mine if you could.
Cheers
Martin

Title: Re: Air box dimensions. A10 plunger
Post by: Swarfcut on 14.01. 2020 10:59

This topic was hot a few weeks ago. For those folks that missed it, some enterprising fella is making the basic airbox carrier/battery mount. Still needs a battery tray to suit but looks a reasonable buy and a good starting point.             

Try this...   

  https://www.ebay.co.uk/itm/BSA-A7-A10-Battery-Carrier-Backplate-Mild-Steel-Undercoated-Rigid-Plunger/202769149391?hash=item2f35fbadcf:g:xP8AAOSwyExda9md

 Swarfy.

Title: Re: Air box dimensions. A10 plunger
Post by: Russ on 14.01. 2020 11:07

Thanks Swarfy yes that looks a reasonable starting point.
Martin send me a PM after 27th this month, I will be away till then, and I will do the best I can.
Russ

Title: Re: Air box dimensions. A10 plunger
Post by: fearie on 14.01. 2020 11:16

Russ pm sent.
Templates would be appreciated!

Title: Re: Air box dimensions. A10 plunger
Post by: fearie on 14.01. 2020 11:17

This is what i have:
https://photos.app.goo.gl/Lo4rjjGKTPjkZT7N7

Title: Re: Air box dimensions. A10 plunger
Post by: fearie on 19.01. 2020 10:44

Meanwhile in Poland...

Title: Re: Air box dimensions. A10 plunger
Post by: fearie on 06.02. 2020 08:05

More pictures

Title: Re: Air box dimensions. A10 plunger
Post by: Nourish on 06.02. 2020 17:31

That's very good that is!