The BSA A7-A10 Forum
Technical (Descriptive Topic Titles - Stay on Topic) => A7 & A10 Engine => Topic started by: sean on 18.10. 2020 22:02
-
some interesting videos on u tube .....AG engineering ....on the oil end feed conversion
https://www.youtube.com/watch?v=8CirTGr927I
-
Hi All,
I know he is experimenting but he has missed out on some fundamental design features of the BSA engine
ie, the cush drive not solidly locating the drive side bearing for one
I do not like the method of reaming the cam bushes either, 19mm vs 3/4 reamer's
A straight dummy crank cannot be made in a 3 jaw chuck either
John