The BSA A7-A10 Forum

Technical (Descriptive Topic Titles - Stay on Topic) => A7 & A10 Engine => Topic started by: Bee-Za on 01.11. 2020 18:57

Title: Engine plates
Post by: Bee-Za on 01.11. 2020 18:57

Hi
Just a quickie
Per photo are these plates fitted correctly.
I’ve fitted the engine lower plates first, hard to the engine with the curly plate to the primary case side.
Then the upper plates outermost with the curly plate again on the primary side

Title: Re: Engine plates
Post by: muskrat on 01.11. 2020 20:21

G'day Bee-Za.
Looks good to me.
Cheers