The BSA A7-A10 Forum
Technical (Descriptive Topic Titles - Stay on Topic) => Frame => Topic started by: GregW on 09.01. 2021 19:25
-
The front rim on my A10 started to rust (long story) and needs to be replaced. I have stainless spokes on the wheel and, being cheap, am hoping I can reuse the spokes to lace to a new rim. Has anyone reused spokes? Is it fraught with peril? *help*
-
If you can get the nuts off them, you can re-use then.
-
Shouldn't be a problem. Stainless spokes (with plated brass nipples) should come undone easily.
-
Thanks guys!