The BSA A7-A10 Forum

Technical => Clutch, Primary, Gearbox => Topic started by: Pollock on 18.12. 2006 11:39

Title: A10 transmission nuts...
Post by: Pollock on 18.12. 2006 11:39
Anyone know a part # or better yet a sources for the 4 nuts for the front of an A10 trannie? It seems every trannie I have on the shelf doesn't have the nuts.
Cheers,
Pollock
Title: Re: A10 transmission nuts...
Post by: fido on 18.12. 2006 13:35
Part number is 67-3034. I would have thought any of the BSA places advertising in the magazines would have them or you could try the stainless specialists.
Title: Re: A10 transmission nuts...
Post by: Beezageezauk on 18.12. 2006 18:55
Hi Pollock,

I agree with Fido. 

The part number you want is 67-3034 which is a 5/16x26TPI (cycle thread) thin wall nut.  This means it has a smaller hexagon than normal which enables it to be tightened with a socket.

These are readily available from most of the UK dealers but I suspect that you are not in the UK.

Let us know where you are and maybe someone could suggest a specific dealer for you to try.

Beezageezauk.   
Title: Re: A10 transmission nuts...
Post by: Pollock on 19.12. 2006 00:27
Indianapolis, IN USA...no british shops around...I would do internet. British only now has a $150 min. now. I need 40 of these but only 4 for the current project. If someone could point me to a sight that would be awesome.
Pollock
Title: Re: A10 transmission nuts...
Post by: a10gf on 19.12. 2006 01:34
Hi. try an email to http://www.srm-engineering.com/ 

srm1a@srm-engineering.com

Regards
E.

( ps, update your info, see Beezageezauk's post here http://www.a7a10.net/forum/index.php?topic=158.0 )
Title: Re: A10 transmission nuts...
Post by: fido on 19.12. 2006 08:08
What about this mob? :
http://www.britcycle.com/
Title: Re: A10 transmission nuts...
Post by: LJ. on 19.12. 2006 10:08
Yes SRM does have them as I bought some myself last summer, reasonably priced too! I think they look so much better than the hex bolts that people seem to go for.
Title: Re: A10 transmission nuts...
Post by: Pollock on 19.12. 2006 11:51
Thanks,
I e-mailed SRM and I am waiting for response.
Pollock
Yes SRM does have them as I bought some myself last summer, reasonably priced too! I think they look so much better than the hex bolts that people seem to go for.
Title: Re: A10 transmission nuts...
Post by: Pollock on 19.12. 2006 22:47
Got them here today....replacement part # was 70-1310. Cost was $1.02 not bad.
Appreciate the help.
Pollock
What about this mob? :
http://www.britcycle.com/