The BSA A7-A10 Forum

Bikes, Pictures, Stories & more => Other BSAs, Other Bikes, Machinery & Tools => Topic started by: flashblack on 20.02. 2021 14:35

Title: QD rear wheel spindle
Post by: flashblack on 20.02. 2021 14:35
Can anyone tell me if these were different for a B31?  I notice that the part numbers are not the same for an A10 as for a B31, but is there any physical difference as the spindle in my plunger B31 protrudes about 1/2" through the wheel nut when tightened up. All others i have seen are about flush with the face of the nut.
thanks in advance  Richard
Title: Re: QD rear wheel spindle
Post by: JulianS on 20.02. 2021 17:01
The swinging arm QD crinkle hub rear wheel spindles for A7 A10 B31 B33 and Gold Star are the same part 67 6161 according to my parts books.
Title: Re: QD rear wheel spindle
Post by: flashblack on 20.02. 2021 19:26
Hi Julians, mines a plunger part number 67 6164. So i was just wondering if the s/a one was a bit longer?
Title: Re: QD rear wheel spindle
Post by: flashblack on 20.02. 2021 19:47
Does this look right?