The BSA A7-A10 Forum

Technical => Clutch, Primary, Gearbox => Topic started by: Hubie on 12.06. 2010 22:19

Title: Clutch help
Post by: Hubie on 12.06. 2010 22:19
G'day all,

I have the four spring type clutch on my bike and was wondering if anyone has any pics they can post of the clutch centre on the gearbox shaft in situ with the primary inner in place as well as without the clutch centre in place so that I can see what the sliding plate and seal is supposed to look like.

It is a swinging arm a10.

Thanks,

Dave
Title: Re: Clutch help
Post by: chaterlea25 on 13.06. 2010 15:34
Hi Dave,
Attached are a couple of pics of the sliding plate and centre adaptor,
they are off the bike I am building up at the moment,
If you need pics of it assembled I can do this during the week
HTH
John O R