The BSA A7-A10 Forum

Technical => Frame => Topic started by: dpaddock on 03.07. 2010 20:35

Title: T-D Fork Dampers
Post by: dpaddock on 03.07. 2010 20:35

I want to make a set of fork dampers for my DBD similar to the Taylor-Dow units that were made in the 1970's. I'll appreciate your help with dimensional info.

Many thanks,

David

Title: Re: T-D Fork Dampers
Post by: muskrat on 03.07. 2010 20:51

G'day David,
                      Go to http://www.a7a10.net/forum/index.php/topic,2869.msg19325.html#msg19325 and remind John O R, and remind him. I was going to buy a set but would rather make one myself.
Cheers

Title: Re: T-D Fork Dampers
Post by: chaterlea25 on 03.07. 2010 22:10

I hav'nt forgotten!!
But I have to remove a damper from my SR to measure the length of the rod betwen the top cap and the damper valve
Forgot to do this when I made the sketch *sad2* *sad2*

Been busy with trying to finish off the other "Bastard" SR thats on the bench  *ex* *ex* *ex*

back soon
John O R