The BSA A7-A10 Forum

Technical (Descriptive Topic Titles - Stay on Topic) => A7 & A10 Engine => Topic started by: 57BSA on 27.07. 2010 12:13

Title: Oil lines
Post by: 57BSA on 27.07. 2010 12:13

I going to hook up my oil lines form the engine to the oil tank on my 57 A10 Swing Arm - does the upper fitting on the engine go to the upper fitting on the oil tank? (The fitting the rocker oil line goes to) - Thanks Wayne

Title: Re: Oil lines
Post by: MG on 27.07. 2010 12:15

Hi Wayne!

There should be markings stamped into the crankcase, near the oil line connectors. F is for feed, which is the lower one on the oil tank, and R is for return, this being the upper one with the rocker oil feed line on the tank.

Cheers, Markus

Title: Re: Oil lines
Post by: 57BSA on 27.07. 2010 13:27

Thanks Markus - that is exactly what I was needing

Wayne