The BSA A7-A10 Forum

Technical => A7 & A10 Engine => Topic started by: redbeeza on 02.11. 2010 10:27

Title: valve clearances
Post by: redbeeza on 02.11. 2010 10:27
Could someone with a Super Rocket running a 357 cam and 8.25:1 CR let me know which valve clearances they use please? Is it inlet .008"; exhaust .010"; or inlet .010"; exhaust .012"?

Thanks,
Terry
Title: Re: valve clearances
Post by: trevinoz on 02.11. 2010 20:38
Terry,
             Either will do.
The wider settings are for maximum power with extra noise.
Trev.
Title: Re: valve clearances
Post by: redbeeza on 03.11. 2010 12:29
Thanks Trev, now I'm clear on this.