The BSA A7-A10 Forum

Technical => Clutch, Primary, Gearbox => Topic started by: oldbikerbill on 19.11. 2010 01:17

Title: A10 plunger pops out of second gear
Post by: oldbikerbill on 19.11. 2010 01:17
My newly rebuilt transmission pops out of second , mostly when cold.  I had the trans rebuilt several years ago but just got the bike back on the road so there's maybe 150-200 miles on it.  Any adjustments that I should make? 
Title: Re: A10 plunger pops out of second gear
Post by: A10Boy on 19.11. 2010 08:34
Yes adjustments are possible.

There is an indent spring arrangement, whereby a plunger in the box is pressed by a spring into a cam plate and holds it in a selected gear. That might need adjusting up.

If you use the search facility you will find loads of info on this.