The BSA A7-A10 Forum

Technical => Frame => Topic started by: Howard on 24.02. 2011 17:00

Title: Plunger Springs
Post by: Howard on 24.02. 2011 17:00
On the Plunger rear suspenion, does the larger spring go at the top or is it the smaller spring at the top ? I have a drawing of were the spacers go but its not detailed enough to see the spring sizing.
Title: Re: Plunger Springs
Post by: stephenrc45 on 24.02. 2011 18:26
Larger on the top. The lower ones are smaller because they are the rebound.
Title: Re: Plunger Springs
Post by: Howard on 24.02. 2011 18:34
Thanks for that, I looked up images of the bikes on the net but still could not see which was which,Then I found a better drawing which confirms it .