The BSA A7-A10 Forum

Technical (Descriptive Topic Titles - Stay on Topic) => Frame => Topic started by: Cider1 on 23.03. 2011 09:36

Title: Full width cast iron rear hub, 58/59
Post by: Cider1 on 23.03. 2011 09:36

Hi
Can anyone help me with either providing me with or pointing me in the right direction to get a sectional diagram of an assembled full width cast iron rear hub from 58/59?  I've tried searches and all I can find are exploded drawings.

Thanks
Frank

Title: Re: Full width cast iron rear hub, 58/59
Post by: pato08 on 23.03. 2011 11:07

Does this help

Pato

Title: Re: Full width cast iron rear hub, 58/59
Post by: pato08 on 23.03. 2011 11:10

Sorry posted 2 of the same

Title: Re: Full width cast iron rear hub, 58/59
Post by: Beezageezauk on 23.03. 2011 16:25

Hi Frank,

Is this what you need?

(https://www.a7a10.net/forum/proxy.php?request=http%3A%2F%2Fi109.photobucket.com%2Falbums%2Fn80%2Fbeezageezauk%2FRays%2520Bikes%2FDSCN1244.jpg&hash=71315c854a671c4ed46d421cce02b1ebf7321eb5)

This is from a Haycraft book of BSA singles but the 1958-on B31 and B33 rear wheel is the same as the A7 and A10 full width cast iron hub.  Note the typo in the description.  Just shows that these errors are not a new thing .... and proof reading wasn't done in the 1960's either.

Beezageezauk.

Title: Re: Full width cast iron rear hub, 58/59
Post by: Cider1 on 23.03. 2011 22:15

Thanks gents, they're exactly what I was looking for.

Frank