The BSA A7-A10 Forum
Technical (Descriptive Topic Titles - Stay on Topic) => Frame => Topic started by: JSF on 23.05. 2011 21:03
-
Hi All,
I've now acquired a sidestand (cake st classics) in another step towards roadworthiness but forgot to ask if there's any specific size/type of bolts to use to fix it to the frame.
The bike's a 58 Golden Flash
Any assistance much appreciated by rookie!
Cheers
John
-
Hi John,
If this helps the original bolts were part number 42-4767.
Beezageezauk.
-
Hi John - from Burton Bike Bits web site - SIDE STAND MOUNTING LUG BOLT - 5/16" X 1 1/8" CEI (SMALL HEAD)
I think these might be the same as the handlebar mounting bolts
-
Excellent - much appreciated!
John