The BSA A7-A10 Forum
Technical (Descriptive Topic Titles - Stay on Topic) => A7 & A10 Engine => Topic started by: Ron B on 12.09. 2011 12:59
-
Hi everyone, I am back with a new question. I have a almost new cast iron A10 head but only a set of A10 later alloy head valve springs. Will the larger, longer springs work in a cast iron head with a 356 cam? I have what I think are a set of cast iron head springs but none of the bit and pieces to fit them. All advice is appreciated.
-
Someone will give you a specific answer no doubt. One thing that springs to mind [NPI] is make sure they aren't coil bound.
-
Hi Ron,
To the best of my knowledge the answer is NO *sad2*
The SR valve springs/ valves, collars and collets are all different from the iron head hardware
HTH
John O R