The BSA A7-A10 Forum
Technical (Descriptive Topic Titles - Stay on Topic) => A7 & A10 Engine => Topic started by: rockthedog on 21.10. 2011 21:06
-
hi i think my thred in on of my spark plugs is a little worn , is helicoil expensive and will the head have to come off to have this repair done, thank you
-
Not enough info, Dog. What's the year and model of your bike?
David
-
G'day rockethedog,
Most would say head off, but I have done numerous with it on to no detrimental affects. A good shop would charge about $30 a hole down here. I could explain how but I only use 1 finger to type. *smile*
Cheers
-
yes as muskrat said - i have done a few times while head is on the bike (it is better to remove the head though though) - i usually put some heavy grease on the cutting tool to catch any debris. if you get it done at a good shop they can do it quite easily (about 45-$100), typically hooking up a vacuum to the exhaust and having the valve open on the side with the repair to "suckout" any swarth (not sure it works but hey).
-
Not enough info, Dog. What's the year and model of your bike?
David
hi david its a iron head 1958 cheers