The BSA A7-A10 Forum

Technical => Lucas, Electrical, Ignition => Topic started by: rockthedog on 29.10. 2011 12:29

Title: ameter a10 swing arm 12v
Post by: rockthedog on 29.10. 2011 12:29
hi ,got a new ameter for my bike , if i put the wires on the back ( 2 ) the wrong way will it blow the new unit cherrs mal.
Title: Re: ameter a10 swing arm 12v
Post by: Duncan R on 29.10. 2011 13:18
Hi,

I connected mine the wrong way round last week when I finished my wiring as it was reading back to front, I swapped the cables over and all was well. I am no expert though and may have just been lucky, might be worth waiting for a reply from one of the many experts on the forum.

Cheers

Duncan
Title: Re: ameter a10 swing arm 12v
Post by: iansoady on 29.10. 2011 14:48
Not an expert but no you won't blow it up, it'll just read the wrong way round.
Title: Re: ameter a10 swing arm 12v
Post by: rockthedog on 29.10. 2011 15:33
Not an expert but no you won't blow it up, it'll just read the wrong way round.
thank you job now sorted cherrs mal.