The BSA A7-A10 Forum
Technical (Descriptive Topic Titles - Stay on Topic) => A7 & A10 Engine => Topic started by: DazSeaton on 08.02. 2012 22:41
-
Anyone know what this is on the rear of the timing cover?.
Looks a bit home made. Might have it off and see.
-
Hi Darren
"Normally" theres a blanking plug there
its where the hole for the rotary breather is drilled during manufacture
HTH
John O R
-
possible breather modification, although difficult to see any advantage
-
I'd say Bill is on the money. I tried that once but there's too much oil splashing around there. Hence your PO re-plugging the hole.
Cheers.
-
I'd say Bill is on the money. I tried that once but there's too much oil splashing around there. Hence your PO re-plugging the hole.
Cheers.
PO???
-
Previous Owner
-
Previous Owner
NOT A POSTAL ORDER THEN *smile* *smile* *smile*